Cancel. The kit includes front strut spacers and lifted knuckles and rear lift blocks plus two rear Premium N3 series shocks. If you have any questions about this product, please don't hesitate to ask us. In short, the shocks will prevent bumpy, queasy, and uncomfortable off-road trips. View cart for details. All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only. Application. Front and Rear Suspension Lift Kit with 3.5" Front and Rear Lift Height (11930) by Rough Country®. Share your opinion on product quality, appearance, installation, and other characteristics. 11930. Rough Country 11930 Installation Instructions. Items being shipped via freight also cannot be guaranteed in time for delivery. Features application valved N3 series shock absorbers which offer the best in balanced performance for on and off-road use, If using factory wheels, a 0.25 inch wheel spacer is required. Increases Ground Clearance. Rough Country 11930 - 3.5" Suspension Lift. Drop Spacer/Skid Plate - Blocks - U-Bolts - Hardware - Rear Premium N3 Shocks. Some suspension components are prone to gradual wear and tear over time and therefore are not covered within the Lifetime Replacement Warranty. This lift kit also comes complete with a pair of premium N3 Shock Absorbers, utilizing Rough Country’s signature shock absorbing technology. I purchased my 2012 Silverado LT towards the end of 2012. For up to 5 years / 100K miles / or until your manufacturer's warranty ends, if there is a failure of a factory warranty-covered part due to installation of a Rough Country suspension product, Rough Country will cover the repairs at a factory authorized shop - all you pay is a $100 deductible! Important Notes * Does not fit 2007 Classic or vehicles with electric steering. This Kit will accommodate 33 x 11-inch tires, as well as wheels measuring from 17 inches to 20 inches in diameter. No guide available for this part yet. Lifted Knuckles. Lift - Incl. available on most items - Details. Exclusions apply. Does NOT fit GMC Denali models with Magnetic Ride Control. Largest source of car performance parts in Canada, Rough Country 1305 - 2.5" Suspension Leveling Lift Kit, Rough Country 1307 - 2" Suspension Leveling Kit, Rough Country 1312 - 2.5" Suspension Leveling Lift Kit, Rough Country 246.23 - 3.5" Suspension Lift Kit, Rough Country 254.20 - 4.75" Suspension And Body Lift Combo Kit, Rough Country 257.20 - 4.75" Suspension And Body Lift Combo Kit, Rough Country 268.23 - 3.5" Suspension Lift Kit, Rough Country 26830 - 3.5" Suspension Lift Kit, Rough Country 26450 - 7.5" Suspension Lift Kit, Rough Country 11930 - 3.5" Suspension Lift, Rough Country 11932 - 3.5" Suspension Lift, Rough Country 1313 - 2" Leveling Lift Kit, Front: Lower strut mount extensions, strut spacers, and hardware, Rear: Fabricated 2-inch lift blocks, U-bolts, and hardware, Levels the front with the rear of the vehicle, No need to disassemble your struts to install, Fabricated blocks offer a longer lifespan than cast blocks, Fits models with cast steel or cast aluminum factory control arms only, Does not fit stamped steel factory control arm models, Does not fit Auto Ride or Auto Leveling models, New fabricated lift block replaces factory equipped lift block, Lower strut mount extensions and hardware, Does not fit 2014-2016 GMC "Denali" models, Fits models with stamped steel factory control arms only, Does not fit cast aluminum or cast steel factory control arm models, Front: Upper control arms, upper POM ball joints, and hardware, Rear: 3-inch fabricated lift blocks, U-bolts, and hardware, Struts/Shocks: (2) Premium N2.0 Front Struts & (2) Premium N2.0 Rear Shocks, Control arms include POM ball joints for greater range of motion and easier installation, Ball joints are pre-installed to ease installation, Fabricated lift blocks are stronger and offer a longer lifespan than cast blocks, Features application valved N2.0 series shock absorbers which offer the best in balanced performance for on and off-road use, Fits cast steel factory control arm models only, Does not fit cast aluminum or stamped steel factory control arm models, New lift block replaces factory rear block, Does not fit GMC Denali models with Magnetic Ride Control, Front: Strut spacers, upper control arms, upper ball joints, and hardware, Body Lift: Body spacers, front bumper brackets, ground strap bracket, and grade 8 hardware, Includes application valved N2.0 series shock absorbers which offer the best in balanced performance for on and off-road use, Body lift provides 1.25-inches of lift, as opposed to the standard 1-inch, Does not fit models with electric steering, Retain factory wheels with .25-inch wheel spacers (#1065), Front: Strut spacers, upper control arms, upper ball joints, driver and passenger side differential drop brackets, differential skid plate, and hardware, Rear: Fabricated 3-inch lift blocks and U-bolts, Differential drops maintain proper axle angle, Fabricated blocks are stronger and offer a longer lifespan than cast blocks, New lift block replaces factory equipped lift block, Levels front of the vehicle with the rear, No strut disassembly or strut compressor required for installation, Features application valved N2.0 series shocks which offer the best in balanced performance for on and off-road use, Fits models with cast steel factory control arms only, Does not fit models with cast aluminum or stamped steel factory control arms, If truck is equipped with a mass damper on the front differential, the damper must be removed, Retain factory wheels with 0.25-inch wheel spacers (#1065), Increased CV axle boot clearance with the stamped steel lower control arm, Features application valved N3 series shock absorbers which offer the best in balanced performance for on and off-road use.